Tuesday, July 14
8:30 – 10:00am
BIMformation: The "I" in BIM
Although BIM has been around for 20 years, it's finally reaching critical mass. While using BIM's capabilities for 3D communication and automatic drawing coordination are becoming well accepted, the information-handling capabilities are just beginning to be exploited. Join Hansen and Berger to learn how sustainable design analysis can now be easily performed where it will have the most impact: in concept- and schematic-level BIM models. Additionally, learn how BIM models can now be rapidly analyzed for quality assurance and rule compliance. Finally, see how the COBIE exchange standard allows data to be easily extracted from BIM models, for automatic population of Facilities Management databases.
1.5 LU
Presented by Michael Hansen, Vice President, AEC Infosystems, Inc.; and Henry Berger, BIM Architectural Consultant, AEC Infosystems, Inc. |
Cultivating Your Firm's Most Valuable Asset: Young Professionals
For many firms, large and small, attracting and cultivating entry-level staff are highly valued objectives—and often two of their most costly challenges. This program introduces a dynamic new strategy for re-focusing and energizing the development of young professionals. By implementing a performance-based Architect Development Program, firms can effectively train and empower young professionals with demonstrable improvement in knowledge, practice skills, judgment and self-confidence.
1.5 LU
Presented by Robert Rosenfeld, R. Rosenfeld Consultation Services.
|
|
|
Did Wright Get it Right?
During his presentation, Reiss will describe the design of Frank Lloyd Wright’s Pope-Leighey House and its applicability to today’s small house designs. Sustainability, site design, construction and other topics will be discussed.
1.5 LU SD/HSW
Presented by Steven M. Reiss, AIA
|
George Washington's Master Vision for the Federal City
Ever wonder how the federal city got created? Want to find out how the Chief Executive of the time, George Washington, decided where to place the Federal City, a 10-mile square allotment granted by Congress in 1787, as our national seat of government? Hear about the process and the political intrigue that went on to secure the land, to set the boundary stones, and how these markers have fared over the last few hundred years.
1.5 LU (AIA) / 1.5 CM (AICP)
Presented by Gayle T. Harris, President, Research Unlimited, Inc. |
|
Integrating Sustainability from Master Planning to the Individual Building
With the advent of “New Town Centers” (that combine life, work & play) in the suburbs and master planned “traditional/New Urbanist neighborhoods” being developed all over the country, the importance of integrating all aspects of sustainability as early as possible in projects from the master plan down to the individual building level has taken on critical importance. At both the master plan as well as the individual building level, the longer you wait to incorporate sustainable practices, the more expensive and possibly less effective they can be. Add the District’s new Green Building Act and stormwater management ordinance and the importance of thoughtful advanced integrated planning in terms of sustainability becomes critical.
1.5 LU SD/HSW (AIA) / 1.5 CM (AICP)
Presented by Chris Earley, LEED AP, Greening Urban LLC and Charles Bergen, Charles Bergen Architect Ltd. |
Making Connections: The Deaf Space Project
Gallaudet University is the world leader in liberal education for deaf and hard-of-hearing students. Centered around the question, "if no one was around, how could you tell Gallaudet is a Deaf University?", the entire community is participating in an ongoing conversation about their specific culture and particular perceptions of place. The process is being led by the Deaf Space Project, a graduate seminar, which serves as a forum for students and faculty to consider the built environment. The Deaf Space Project has empowered its students to pick up the pencil as designers and articulate the fundamentals of Deaf Space as it relates to their unique sensibilities. Hansel Baumen, the University's campus architect, has been instrumental in providing guidance and access to the tools designers typically use. The Deaf Space Project began as an outgrowth of an evolving conversation between the University Community Center and SmithGroup during the process of designing the Sorenson Language and Communication Center. More recently, in collaboration with Ayers/Saint/Gross Architects + Planners, the Deaf Space Project has propelled the concept of Deaf Space at Clerc Hall, an existing residence hall on the Gallaudet campus slated for renovation.
1.5 LU (AIA) / 1.5 CM (AICP)
Presented by Alick Dearie; Greg Mella; Hansel Bauman; Robert Sirvage; and Eric Moss |
Transforming Architecture: Ready to start your own practice? You need leads, leads, leads...
In this session, participants will learn new ways to get paid while finding leads, how to obtain clients in our troubled economy, and new ideas about building a brand while remaining independent. Whether you are getting ready to start your own firm, or have been managing one for years, this lecture will present some revolutionary ideas.
1.5 LU
Presented by Karen L. Pitsley, AIA, CAPS, President, Transforming Architecture LLC; and John L. Herman, Jr. "Herman," Director of Sales and Marketing, Transforming Architecture LLC. |
Vision, Reality and Development
Projects driven by strong vision at the development stage provide many opportunities for success. This presentation will focus on three case studies, all of which are innovative in their development approach, committed to environmental and economic sustainability, and notable for the vision of their developers: a mixed-use and public space development project located in historic Savannah, Georgia; the conversion of a coffee plantation located in the Republic of Panama into an eco-tourist destination and working organic farm; and the creation of an industry development company in Spokane, Washington.
1.5 LU
Presented by Boyd A. Schalnat, AIA, TOIN.
|
|
10:15 - 11:45am
KEYNOTE ADDRESS
We Can Do Better: A Frank Discussion About Design and Growth in the 'Burbs
Montgomery County planners are beginning to rethink growth management to enhance quality of place in their communities. In his Keynote Address, Stanley will discuss innovative ways to bring the natural environment into the design of buildings, spaces and streets with the goal of creating great places with better connections.
1.5 LU (AIA) / 1.5 CM (AICP)
Presented by
Rollin Stanley, AICP, Planning Director for Montgomery County. |
12:45 – 2:15pm
A Case for Niche Housing Projects in New Communities
Many local jurisdictions have assembled Land Use Task Forces to develop progressive visions for growing communities. The results share many goals such as creating higher-density, mixed-use, pedestrian-friendly, car-adverse, and green-conscious urban communities. Providing a niche market residential project, such as Green Housing, Artist Housing, or Live/Work Housing, within these developments helps them become distinguished, vibrant, memorable, and profitable.
1.5 LU (AIA) / 1.5 CM (AICP)
Presented by Laurence Caudle, AIA, Hickok Cole Architects. |
|
Farmers Markets: Urban/Rural Connections
In this session, architects will learn about the growing trend of farmers markets and their benefits for public health, local economies, developing public spaces, and how they can contribute to this growth. Farmers and public markets have highly specialized uses, are challenging business ventures and vital public undertakings. Historically, farmers markets were the traditional method for food delivery to city centers, but big-box retailers and national grocery corporations have commercialized and standardized food supply chains from the field to the plate. Farmers markets are again becoming integral parts of urban/rural linkages, and continued to rise in popularity, mostly due to the growing “Locally Grown Food Movement”. The reintroduction of the farmers markets in the cities has reenergized public spaces and neighborhoods and has provided economic development opportunities for small size farm operations. Learn how the USDA supports this movement of direct marketing.
1.5 LU (AIA) / 1.5 CM (AICP)
Presented by Fidel R. Delgado, AIA, United States Department of Agriculture. |
|
Gimme Shelter: Housing in Developing Countries
More than half the world's population now lives in urban areas, and more than a billion people will need to be housed in this century. This session will discuss sustainable development practices and infrastructure decisions that need to be undertaken to meet the upcoming demand. Additionally, this session will discuss varying cultural needs, indigenous materials and construction methods, and the lack of mortgage systems in many parts of the world.
1.5 LU (AIA) / 1.5 CM (AICP)
Presented by Dhiru A. Thadani, Ayers Saint Gross. |
High Performance Building Envelopes
What needs to be done with our building envelopes so that we can save on energy? During this presentation, a panel of speakers will discuss the theoretical and practical applications of the second law of thermodynamics, "insulation theory," and the EPA's position on energy-saving building envelopes.
1.5 LU SD/HSW
Presented by George Fritz, COO, Horizon Builders; ASA Foss, Program Director of Maryland Home Performance, Energy Star; and Geary Deptula, General Manager, Horizon House Works. |
|
Is Fellowship Your Future?
This is a course designed for both visionaries and procrastinators (which may be the same person!) who are dedicated to contributing to the advancement of the architecture profession. Find out how effective planning may contribute to achieving your professional and life goals, including the dream of becoming a Fellow of the AIA. Learn strategies for developing and supporting your career plans, including networking, business development, and documentation tools. If this is the only course you attend at DesignDC, it promises to reap positive results for your future and for the future of the profession.
1.5 LU
Presented by Kathryn Tyler Prigmore, FAIA, HDR Architecture, Inc. and Marilynn Deane Mendell, WinSpin CIC, Inc. |
Lighting for Public Spaces and Creative Use of Fluorescent and LED Sources for Sustainable Environments | TRACK
Interested in learning more about new and sustainable lighting solutions? Sexton will begin this presentation by discussing the importance of nighttime identity, then guide attendees through the lighting design process. Moran will pick up at Sexton’s conclusion to discuss current LED and Fluorescent technologies and architectural applications.
1.5 LU
Presented by George S. Sexton III, George Sexton Associates; and Maureen Moran, MCLA. |
NCARB: IDP Through Certification
What is NCARB? IDP? ARE 4.0? Rolling Clocks? Licensed to Practice? NCARB Certified? NCARB is with you on the path toward licensure…and for life! This presentation will answer basic questions of who, what, why, when and even how you can help yourself along that path more smoothly with NCARB. This presentation will include updates on any new or proposed modifications to NCARB programs, and ample time will be allotted for individual questions.
1.5 LU
Presented by Harry Falconer Jr., AIA, NCARB. |
|
Total Precast Systems: School Planning, Sustainability, Design, Construction & Cost
Precast concrete is considered a modern approach to “conventional” masonry design; with a system lower in cost, more energy efficient, more secure, and with on-time or accelerated delivery. The Precast Industry provides budgets, details, analysis, manufacturing, and installation – as well as work early on with the designer to achieve his intended vision at the lowest possible cost. Join Schoenfeld as he reviews several recent projects including discussions on thermal performance, project delivery, LEED, and the application of Design/Build (as an alternative methodology) that improved both material selection and delivery schedule. Also: Learn how Tindall Corp. satisfied an emergency situation in one jurisdiction by manufacturing and erecting an entire high school within a five month window.
1.5 LU
Presented by Gary Schoenfeld, Marketing Manager, Tindall Corporation. |
|
2:30 – 4:00pm
Collaboration, BIM and Integrated Project Delivery
Integrated Project Delivery leverages early contributors of knowledge and expertise through the utilization of new technologies, allowing all team members to better realize their highest potentials while expanding the value they provide throughout the project lifecycle. Focused on the necessary goal of ecologically responsible design and fully integrated project teams, this presentation will cover the ideas behind IPD and the forces driving change, connections to sustainability, outcomes to the profession, activities of the American Institute of Architects, and provide an overview of AIA’s IPD documents.
1.5 LU SD/HSW
Presented by Michael Bomba, Esq., American Institute of Architects and Robert Middlebrooks, AIA, Industry Programs Manager, Autodesk. |
|
Creating the School of the Future: Toward Sustainable Neighborhood Schools
While budgets are being taxed by rising real estate values, escalating construction costs, and skyrocketing transportation expenses, our needs to provide high-performance, forward-thinking educational environments for our children and communities remains a constant. This presentation will illustrate how the sustainable school of the future will come about by creatively engaging the buildings and sites that are already part of our communities. Furthermore, O'Donnell will provide lessons of community, sustainability, and citizenship resulting from the revitalization, modernization, and creative enhancement of the community school.
1.5 LU SD/HSW
Presented by Sean O'Donnell, Ehrenkrantz Eckstut & Kuhn Architects. |
|
Harbor East Baltimore: An Evolution of Urban Mixed Use Design
In his presentation, Fillat will review the 16-acre redevelopment project in Baltimore’s East Harbor from initial master planning in 1989 through the present. Learn about mixed-use building design and construction, the synergistic effect of urban mixed-use programming and the financial structures of realizing mixed-use development.
1.5 LU (AIA) / 1.5 CM (AICP)
Presented by Peter Fillat, AIA, LEED AP, Peter Fillat Architects, Inc. |
Public Art as Urban Placebo?
The iconic nature of art can alter the way we perceive and re-member a space. But what areas are and are not appropriate for public art installations? How does art in public space differ from art in a museum? In their presentation, Fitch and Bedat will explore the criteria on which decisions should be based to place art in public spaces, and discuss existing precedents to illustrate successful public art installations.
1.5 LU (AIA) / 1.5 CM (AICP)
Presented by Jonathan Fitch and Claire Bedat, both of the Landscape Architecture Bureau.
|
|
Riding the Vortex: Stage 4
vortex n. a whirling mass… that draws everything near it toward its center
Numbering just over 200, the number of licensed African-American women architects is an emerging force within the profession. They have been in architecture for a long time; they are becoming licensed, starting firms, and are rising to heights within established firms at a quickening rate. What attracts African-American women to the architectural profession? Does race, gender, age, culture, and socio-economic background complicate or facilitate success for these women? These issues will be addressed by a panel of African-American women at various points in their architecture careers. Following the panel discussion, the session will be opened up to solicit additional perspectives from the audience with the intent of broadening participants' awareness of the ways entry and success in the architectural profession has been achieved and, in some cases, thwarted.
1.5 LU
Presented by Kathryn Tyler Prigmore, FAIA, HDR Architecture, Inc. and Barbara G. Laurie, AIA, Devrouax & Purnell. |
The Architect as Designer, Community Engager, and Change-Agent
When working in communities on the brink of great change, architects are challenged to take on the roles of designer, community engager, and change-agent. Through case studies of affordable housing projects across the region, this session will explore how the architect does more than just design, but becomes an active participant in transforming communities.
1.5 LU
Presented by Michael Wiencek, President, and LaToya Thomas, Planning & Business Development, both of Wiencek + Associates Architects + Planners. |
The Evolution of Masonry: Past, Present, & Future of Designing with Brick
The use of modular clay units in creating comfortable interior spaces has a history that is at least 4,000 years old and until recently, has been the prevailing strategy for maximizing user comfort in many regions of the world. This presentation will look at the application of brick construction in providing human comfort – past and present. What do we still have to learn about bricks and how will this material contribute to future sustainability goals?
1.5 LU
Presented by Peter Doo, AIA, LEED AP, President, Doo Consulting; and Robert Busler, AIA, Principal, Michael Winstanley Architects Planners. |
The Monumental Core Framework Plan
The Monumental Core Framework Plan is a joint effort of the U.S. Commission of Fine Arts and the National Capital Planning Commission to build upon the superlative assets of Washington, DC to address social, cultural, and ecological needs of the 21st Century. The Framework Plan re-imagines federal precincts near the National Mall as a series of destinations interconnected with each other, the waterfront, and the surrounding urban fabric. Its proposals aim to infuse the civic qualities of the Mall and the vibrancy of the city throughout the monumental core to transform how visitors, workers, and residents experience Washington, DC. While providing specific guidance on creating opportunities for public and private development, the Framework Plan also creates locations for future memorials and museums, and protects the historic open space of the National Mall. It proposes projects to overcome physical barriers that now discourage connections, and supports compact, mixed-use development, and the redesign of public spaces and parks to promote a walkable, transit-oriented, and sustainable future.
1.5 LU (AIA) / 1.5 CM (AICP)
Presented by Thomas Luebke, AIA, Secretary, U.S. Commission of Fine Arts; Bill Dowd, Director, Plan and Project Implementations Division, National Capital Planning Commission |
4:00pm
Tradeshow Opens; Opening Reception in the Tradeshow (4:00 - 6:00pm)
Wednesday, July 15
8:00am
Tradeshow Opens; Breakfast available in the Tradeshow
8:30 – 10:00am
3D Printing: Using a Design File for the Perfect Model
If you're designing in 3D or passionate about models, don't miss this opportunity to learn how to prepare a good file for 3D Printing. Participants will have the opportunity to see the file creation process, the bumps along the road, and how to do it right the first time. Levitz will also go into the pro's and con's of the most popular 3D Printing manufacturers and show samples from various projects. Take advantage of this opportunity to learn how architecture and engineering firms are using 3D Printing technology to inspire new discussions with their design teams or simply to impress their clients.
1.5 LU
Presented by Justin Levitz, Director of New Technology, National Reprographics Inc. |
|
|
Bird's Eye View: Building Information Modeling (BIM) in Planning Practice
Working in BIM (Building Information Modeling) allows architects, in collaboration with clients, planners and other team members, to use parametric information when approaching program requirements during a master planning exercise. This session will introduce the fundamental application of BIM in planning to make better decisions about programming, adjacencies, and site constraints.
1.5 LU
Presented by James Huynh, Assoc. AIA, Designer; and Erin M. Powers, Assoc. AIA, both of The Onyx Group.
|
Emerging HVAC Technologies
With the incredible demand for green buildings, architects have become the defacto experts on all things LEED for their projects. As a result, architects are having to learn more about basic HVAC systems and their impact on a building's overall energy performance. The goal of this educational session is to help architects better understand HVAC options in building design and specifically, gain a better understanding of emerging HVAC technologies such as Variable Refrigerant Flow Zoning (VRFZ) systems.
1.5 LU SD/HSW
Presented by Mitsubishi Electric HVAC Division.
|
Repositioning for the 21st Century: Design Opportunities for DC's Urban Fabric
Varner and Rollman will use two distinctive case studies—1200 19th Street, NW and Constitution Center—to identify, compare and contrast the complex issues and innovative architectural and engineering potential found in the repositioning of older office buildings for the 21st century. Issues of architectural aesthetics, historical precedence, engineering adaptation, and construction challenges will provide recurring themes for this presentation.
1.5 LU
Presented by David Varner, AIA, LEED AP and Andrew Rollman, AIA, LEED AP, both of SmithGroup.
|
|
Stories Help Leaders Win
One of the best ways to affect change comes from storytelling. Your stories can come from real life experiences and lessons-learned, a religious text, a folk tale, or a sports analogy. Knowing your audience and which tactic works best in a given situation can be tricky for the inexperienced. Join Mendell to discover how stories help people make good choices. And come prepared to share at least one of your favorite business stories!
1.5 LU
Presented by Marilynn Deane Mendell, WinSpin CIC, Inc. |
|
The Buck Stops Here: Strategies for Controlling Housing Design Costs
Challenging economic times are forcing everyone to reassess how
money is spent. This presentation looks at various building types and addresses the cost impacts, as well as the design and efficiency impacts, of choosing certain design elements. The goal of this presentation is to illustrate that whether you are designing a Class-A office space or a 12-unit, 100% affordable housing development, you can find ways to achieve great design at a better price.
1.5 LU
Presented by Michael Wiencek, President, Wiencek + Associates Architects + Planners. |
|
The Future of Air in Architecture
Green design presents architects with the competing imperatives of increased energy efficiency and increased sensitivity to the comfort of the indoor environment. With a look back at pre-industrial, vernacular strategies for ventilation and human comfort, this session will look forward to distinctly architectural solutions, while looking around at some developing HVAC technologies.
1.5 LU SD/HSW
Presented by Brian J. Donnelly, AIA, LEED AP, Perkins Eastman. |
|
10:00 - 11:00am
Beverages available in the Tradeshow
10:30 – 12noon
Bringing New Life to Old Buildings
The objective of this session is to educate participants on the importance of long range planning, and assisting the client in evaluating the feasibility of new construction. It is also about the importance of working closely with the owner, stakeholders, and community to understand current and future operations. This session will highlight the Berkeley County Judicial Center located in Martinsburg, West Virginia. This building was a 1920’s mill that was turned into an outlet mall in the late 1980’s. Shortly after this conversion, the building became abandoned, but was purchased in 2000 by the Berkeley County Judicial Center. This case study will explore the challenges and successes of revitalization that created a consolidated county government complex and jump-started revitalization in this West Virginia community.
1.5 LU
Presented by Kristine Bishop Johnson and Ken Jandura, both of AECOM Design. |
|
Building Information Modeling (BIM) in Design Practice
Team members can utilize BIM to make more informed decisions during all phases of design: schematic, preliminary, construction documents, and construction administration. In addition, the working model can provide visuals at every stage to be used in construction documents, presentations, and marketing. Attend this session to learn more about the fundamental application for everyday use of BIM in design and construction practice.
1.5 LU
Presented by James Huynh, Assoc. AIA, Designer; and Erin M. Powers, Assoc. AIA, both of The Onyx Group. |
|
Commercial Fenestration Using Polymer Materials
Learn to recognize PVC window and door systems for various commercial applications; how tilt-turn windows and door systems operate; how hybrid materials contribute to the success of polymer curtain walls; and why commercial PVC windows and doors are ideal for green buildings.
1.5 LU
Presented by Mike Maher, REHAU. |
It's Easy to be Green
In this session, Schwartz will describe several local examples of green residential projects with low construction costs. Learn about the limits and compromises that made a project easy and low-cost, and how to get your contractor on board.
1.5 LU SD/HSW
Presented by Robert Schwartz, Schwartz and Peoples Architects. |
|
Marketing New Business in a Challenging Economy
It is possible to stabilize your existing business during these challenging economic times! Attend this presentation to learn how to develop a business plan, cultivate business relationships and enhance your customer service.
1.5 LU
Presented by Michelle Honey, FAIA, Hess Construction + Engineering Services. |
Rapid Building Performance Analysis Using a BIM Model
Are you interested in how BIM tools can be used to help in the modernization of an existing building or optimizing new building performance? This session is for you! Learn how to take a BIM model and quickly perform a variety of preliminary building performance analyses including energy, water and daylighting. Meehan will walk participants through the process of creating a simple building model to be used as a baseline for estimating building efficiency.
1.5 LU SD/HSW
Presented by T.J. Meehan, AIA, LEED AP, Director of Professional Services, CADD Microsystems, Inc. |
|
Skating on Thin Financial Ice: Quality Improvement in Planning and Design of Hospital Facilities
During this panel discussion, four representatives from nationally recognized healthcare planning, design, and consulting firms will discuss quality and performance improvement initiatives that healthcare organizations are facing as they work toward meeting consumer and market demands for quality of care and environments of care.
1.5 LU
Presented by Ray Brower, RTKL Architects; Jonathan Hoffschneider, AIA, LEED AP, Perkins+Will; John Currie, AIA, FRSH, Ewing Cole; and Fred Bentley, Advisory Board Company. |
|
12noon – 2:00pm
Lunch available in the Tradeshow
2:00 – 3:30pm
Beyond Repair: Historic Window Replacement
This program examines fenestration issues inherent in historic building projects. Because seemingly minor changes in window configuration can have surprisingly major -- and adverse -- effects
on the overall appearance of a building, most historic district design guidelines pay special attention to windows. During this presentation, window evaluation and preservation methods will be reviewed, and rehabilitation planning and window specification for historic applications will be addressed. Commercial and residential case studies will be included to illustrate successful replacement solutions for windows in historic buildings.
1.5 LU SD/HSW
Presented by Marc S. Held, Vice President of Commercial Sales, Marvin Windows and Doors/Light Styles Ltd. |
|
Carbon Metrics
When we look at energy use, we tend to focus on cost (ASHRAE 90.1), or energy use intensity (kBtu/SF), but actually it is the carbon that matters. Shouldn't we be indexing our building energy performance against the resulting carbon emissions? This session will look at case studies to illustrate the design implications of focusing on carbon emissions (tons of carbon dioxide equivalent/SF) as a performance metric.
1.5 LU SD/HSW
Presented by Russell Perry, SmithGroup. |
Designing a High Performance Building through Facilitated Integrative Design, an Owner's Perspective
Phipps Conservatory is home to the first LEED-certified building in a Public Garden and the award winning Tropical Forest Conservatory—the most energy efficient conservatory in the world. Now using a facilitated integrative design approach, Phipps is engaged in the design and construction of a Living Building to house its Research, Education and Administrative functions. The process of engaging a team approach to the design began informally with the construction of the Tropical Forest Conservatory, and was then adopted as a contractual requirement to participate in the design of the new building. Piacentini will present an owner’s perspective on the process and benefits of building a high performance building using integrative design.
1.5 LU SD/HSW
Presented by Richard V. Piacentini, Phipps Conservatory and Botanical Gardens. |
|
Green Economics
How costly is being green? Which green products give the greatest value for the smallest buck? Is it possible to know when you will get your money’s worth? In her presentation, Maloo will help participants read green labels, analyze timing and life cycle decisions, and present several case studies employing green technology or products such as geothermal energy, SIPs, energy-efficient lighting, and more.
1.5 LU SD/HSW
Presented by Nea Maloo, AIA, LEED AP, SHOWCASE Architects & Developers. |
|
How to Get Work with the DC Office of Property Management (OPM)
The Washington, DC Office of Property Management (OPM) will administer $700 million in capital construction projects over the next six years. Attend this presentation to learn more about the process of procuring architecture and engineering services with the construction division of OPM.
1.5 LU
Presented by Curtis Clay, Administrator; Brian Hanlon, Executive Project Manager; and Gerick Smith, Deputy Director, all of the DC Office of Property Management, Construction Division. |
|
International Design Opportunities and Strategies
Looking to expand internationally? In his presentation, Boggs will discuss international marketing outreach and exposure, various business approaches, and will present a compendium of recent commissions by a mid-size U.S. firm and highly visual animations of design work throughout Middle East and India.
1.5 LU
Presented by Joseph A. Boggs, FAIA, Boggs & Partners Architects. |
The Do's and Don'ts
of Detailing Concrete Masonry Construction
Interested in learning how and why particular details for concrete masonry are used? Attendees to this program will have the opportunity to take part in an in-depth discussion for many universal requirements such as mitigating moisture penetration, accommodating for movement, insulation strategies, energy performance, and detailing for safety, security, and sustainability.
1.5 LU HSW
Presented by Robert S. Zobel, PE PhD, Executive Director, Concrete Masonry Promotions Council. |
|
|
3:30 – 4:30pm
Cookie and Beverage Break in the Tradeshow
Thursday, July 16
8:30 – 10:00am
Balancing Act: How to Do Great Design, Make Money and Keep Your People Happy
How do you nurture your office culture, keep your business on track and win design awards all at the same time? This seminar will give you a peek inside a firm that strikes a balance inspired by their motto: Great Design, Great Management, and a Great Place to Work. You will learn how to set achievable goals for your future, produce a dazzling marketing plan, create a vibrant design culture, manage profitable projects and get things done!
1.5 LU
Presented by Yolanda Cole, AIA, IIDA, LEED AP, Hickok Cole Architects. |
|
Light Emitting Diodes: An Architect's Primer
An overview of LED technology in various architectural applications will illustrate the diverse methodologies possible and why their advancement into the marketplace has been so rapid. Case studies show successful uses, but buyer beware!—Using them requires a basic awareness of the system components in order to effectively specify the products for successful installation.
1.5 LU HSW
Presented by Debra Gilmore, IESNA, D. Gilmore/Lighting Design Inc. |
|
Meeting Challenges and Avoiding Pitfalls in a Historic District LEED Project , an Owner’s Perspective
What was originally a simple, low-budget project intended to rehabilitate a vacant 5,400 square foot building to code became instead a LEED-targeted commercial property. In his presentation, Bell will discuss what could have gone wrong and how expectations were exceeded. He will also share practical strategies and lessons-learned in achieving sustainability and energy-efficiency in a historic building while respecting its character and original features.
1.5 LU SD/HSW
Presented by T. David Bell, AIA, LEED AP, BELL Architects, PC. |
|
Parking Garage Design
Parking facilities are becoming an increasingly more common requirement in developing projects in all parts of the region. In this presentation, a Parking Consultant from O’Donnell & Naccarato with 16 years of parking-related experience will discuss such items as functional design issues and options, design criteria and structural options, code issues, security issues, access and revenue control options, and MEP needs.
1.5 LU HSW
Presented by Stephen Dellinger, AIA, O'Donnell & Naccarato. |
|
Practicing BIM: Beyond the Technology
Join McLeod as he takes BIM beyond software implementation and embraces integrated practice and the new culture of true collaboration. Learn how to develop strategies to align and advance their your with current and emerging BIM technologies, and how to identify and prevent disruptive challenges that might otherwise hinder your firm’s technological advancement.
1.5 LU
Presented by Gary T. McLeod, Cannon Design. |
|
Solar Power Basics: PV, Hot Water and Ventilation
This session will present the basic concepts behind photovoltaic systems including solar panels, solar hot water systems, and solar ventilation systems. Deering will also discuss the economics and life cycle costs of these systems.
1.5 LU SD/HSW
Presented by Craig Deering, AIA, RTKL Associates, Inc. |
|
Three Steps for Implementing a Paperless Workflow
Architectural, engineering and construction firms are migrating to paperless workflows to reduce paper usage and associated costs, improve turnaround time, and implement sustainable business practices. How can your firm transition to and maintain a paperless workflow? What documents and processes can be performed electronically, and how can recipients interface with these documents electronically to reduce printing and paper distribution? This session will answer these questions by discussing three steps for successfully implementing a paperless workflow and sharing examples from case studies.
1.5 LU HSW
Presented by Sasha Reed, Bluebeam Software, Inc. |
|
10:15 – 11:45am
Building Design and Energy Markets: What Designers Should Know
As designers, architects, and engineers, we influence local, long term decisions for energy use in buildings. Because buildings are responsible for a large portion of energy consumed in the U.S., they define markets for electricity and natural gas. This session will explore the relationships between building design and opportunities to influence energy markets.
1.5 LU SD/HSW
Presented by Craig Deering, AIA, RTKL Associates, Inc.
|
|
Chasing the 2030 Challenge
This session is about the challenges and lessons learned as the AIA Headquarters design team works toward both achieving a 60% energy reduction by the completion of construction and developing a strategy for achieving carbon neutrality by 2030. Attendees can expect to learn what to consider when pursuing a carbon neutral renovation project, how to achieve carbon neutrality with a restricted budget, and just what it means to be carbon neutral based on the 2030 challenge.
1.5 LU SD/HSW
Presented by Marnique Heath, STUDIOS Architecture; Christopher G. Kirchner, PE, Syska Hennessy Group; Samantha LaFleur, Atelier Ten; and Christopher Gorthy, DPR Construction Inc. |
|
Finding Success with the Design/Build Model
This program will show architects how to take control of the design/build process. Both owner-led design/build and architect-led design/build provide opportunities to achieve the benefits of design/build; cost control and compressed schedule, while keeping the architect in a lead role. Using case studies, we will explore two models that use the architect's training and experience to add value to the design/build process.
1.5 LU
Presented by Beth Buffington, Little Diversified Architectural Consulting with Susan Pervi, Vice President for Student Life, The Catholic University of America and Chris Landis, Landis Group Architects. |
|
Greening DC's Public Schools
Since taking office, Washington DC Mayor Adrian Fenty has made the transformation of the District of Columbia Public Schools (DCPS) system his first priority. Repairing, renewing and upgrading DCPS's buildings play a critical part in Fenty's plan. More than two billion dollars has been committed over ten years to renovate, expand and/or replace flagging school facilites; greening the schools has become an important driver in their transformation. Covered by provisions of the DC Green Building Act, the renewal of DC's schools requires that they obtain LEED certification. Elefante's presentation will provide an overview of DCPS's building program, the requirements of USGBC's LEED for Schools rating system, and examples of DCPS's green schools.
1.5 LU SD/HSW
Presented by Carl Elefante, FAIA, QUINN EVANS|ARCHITECTS. |
|
How to Keep Your Clients Happy
So you think it’s just a matter of adhering to the old saw, “the customer is always right”? Well, you might be surprised as we draw the distinction between a customer and a client, a salesman and a professional. What do clients really want? Find out how to better understand your client, how to lead them where they should go, and how to say no when you need to…and still keep them happy!
1.5 LU
Presented by Michael E. Hickok, AIA, Hickok Cole Architects. |
|
Parametric Modeling of Horizontal and Vertical Shading Devices in Maya
Horizontal and vertical shading devices, such as overhangs, fins, and louvers can be utilized to reduce solar heat gain for the internal environment. Rangarajan will present a study using Maya modeling software to assist in parametric positioning of such shading devices according to building location and orientation. Learn about the relationships between location-specific characteristics and design of shading devices, and through a case study, how research informs sustainable building design.
1.5 LU SD/HSW
Presented by Hari Priya Rangarajan and Ajla Aksamija, both of Perkins+Will. |
Sustainable Structures with Precast Concrete
Can precast concrete help you earn LEED certification? Precast concrete integration strategies focus on solutions that yield multiple benefits. For example: reducing construction waste also reduces the need to transport waste from a job site; designing high-performance wall panels reduces the size of HVAC equipment thereby lowering energy costs over the life of a building. Join Schultes to find out if precast concrete is an option for your next project.
1.5 LU SD/HSW
Presented by Monica Schultes, Oldcastle Precast Building Systems. |
|
12:15 – 1:45pm
TOURS
TOUR: Adolf Cluss: Master of Sustainable Design
Explore the newly restored and modernized Eastern Market, one of Cluss' few remaining buildings.
1.5 LU SD/HSW
Presented by Carl Elefante, FAIA, QUINN EVANS | ARCHITECTS.
|
TOUR: Green Community
The health of our communities, our planet, and ourselves depend on how we plan, design, and construct the world between our buildings. The National Building Museum's exhibit, "Green Community," explores the origins of our precarious ecological situation and introduces communities large and small where citizens, political leaders, planning and design professionals, developers, and government agencies are working together for a more sustainable future. Join curator Susan Piedmont-Palladino on a special tour of the exhibition.
1.5 LU SD/HSW
Presented by Susan Piedmont-Palladino, Curator, National Building Museum.
|
TOUR: Greening DC's Public Schools
In conjunction with the Educational Session of the same name, a tour will be conducted of HD Cooke Elementary School in Adams Morgan. This is the first DCPS major capital renovation and expansion project conducted under the LEED for Schools program.
1.5 LU SD/HSW
Presented by Carl Elefante, FAIA, QUINN EVANS | ARCHITECTS |
TOUR: Meeting Challenges and Avoiding Pitfalls in a Historic District LEED Project
In conjunction with the Educational Session of the same name, Bell will host a tour of his newly renovated office space in downtown Washington, DC. Lunch provided.
1.5 LU SD/HSW
Presented by T. David Bell, AIA, LEED AP, BELL Architects, PC.
|
TOUR: RTKL: A LEED-CI Platinum Office
RTKL designed their new space at 2101 L Street NW not only to showcase the international design firm's commitment to sustainable architecture, but also to reflect their collaborative culture and work processes. A classic example of "practice what you preach," the 60,000 SF space, which will accommodate more than 240 employees, is on track to receive LEED-CI Platinum certification. HITT Contracting is the general contractor.
The new space is meant to embody RTKL's collaborative ethos and set the standard for sustainable corporate interiors. An open work plan, touchdown spaces, extensive WiFi, abundant natural light and in-board vice president offices all foster an environment that is more about teaming and partnerships than a traditional corporate heirarchy. Design labs on each floor feature impressive AV functions to allow for more interactive charettes. And, of course, amenities such as an out-door terrace and game area (Wii, ping pong, etc.) offer ample opportunity for relaxation.
1.5 LU SD/HSW
Presented by RTKL.
|
|
2:15 – 3:45pm
Building a Company of Rainmakers
What is the secret to a successful firm? This presentation will provide you with the keys to train a company of networkers. It will teach you how to break down the barriers that keep your employees from reaching their potential, and will take away the mystery of developing a company culture that fosters the development of relationships.
1.5 LU
Presented by Tim Klabunde, William H. Gordon Associates, Inc. |
|
Commercial Plumbing for Efficiency: Saving Water, Preventing Hassles
Gilmore has joined our line-up this year to help architects understand water-efficient plumbing products available for commercial use. His presentation will cover the mechanics of water-saving toilets, urinals and faucets, considerations for performance and maintenance on water-saving plumbing devices, and LEED certification as it relates to indoor plumbing.
1.5 LU SD/HSW
Presented by Mike Gilmore, American Standard Bath & Kitchen |
.Everyone Wants to Design--So Let Them!
Can collaboration turn good design into great design? This presentation includes strategies for involving all levels of staff in the design process without losing control. Hickok and Holzbach will present a framework for design in the middle-ground between “Dictator of Design” and a “free-for-all.”
1.5 LU
Presented by Michael E. Hickok, AIA and Robert L. Holzbach, AIA, both of Hickok Cole Architects. |
|
Home Sweet Livable Home
Statistics show that people with disabilities represent 18% of the total population, and as the “baby boomer” generation retires, the need for both affordable and fair market adaptable/accessible housing will continue to grow. Twenty years have passed since the Fair Housing Act was amended to include that no public or private housing provider with four or more units could discriminate on the basis of disability. While there are many safe harbors to design and construct under, developers, property owners and managers, housing organizations, nursing homes—and yes, design and construction professionals—are getting hit with lawsuits for failure to meet compliance. Join Cocuzzi to learn more about fair housing, accessible design, and the desire to provide functional and comfortable homes for all.
1.5 LU HSW
Presented by Carol A. Cocuzzi, President & CEO, Accessibility Matters, LLC. |
|
How to Sell Solar to Your Clients
Join Madison, Bennett and Schlegel as they present the successful integration of renewable energy-producing materials into architectural design. They will lead participants through the science of photovoltaics, the legislative atmosphere in the District of Columbia, Virginia and Maryland, and finally, how to get your clients on board.
1.5 LU SD/HSW
Presented by Jeffrey Madison, Bob Bennett and Eric Schlegel, all of Energy & Environment, Inc. in conjunction with WDG Architecture, PLLC.
|
|
Who Controls Energy Efficiency?
In his presentation, McDaniel challenges the popular belief that engineers are chiefly responsible for energy efficiency by suggesting that architects have more control over the choices made relating to energy efficient buildings. By providing calculations that reveal the effects of popular choices on HVAC load, and presenting other real-world cost pricing and reduced utility cost, he will prove to his audience that the architect’s energy savings are potentially greater than the mechanical engineer’s savings.
1.5 LU SD/HSW
Presented by Chris J. McDaniel, PE, LEED AP, Jordan and Skala Engineers, Inc. |
Wildlife in the City: Avoiding Conflicts, Enhancing Benefits
As the built environment encroaches on wildlife habitat, and as wild animals learn how to exploit the habitats we build, conflicts between wildlife and structures are becoming increasingly common. Yet the connections between people and the natural world remains a vital component of people's lives as well. In her seminar, Lewis will identify some of the most common problems encountered by architects in maintaining the integrity of their structures, as well as some of the benefits that can be derived from the concept of designing with nature. A new profession that bridges the environmental, architectural, social, and economic concerns associated with wildlife in the city has arisen to address both the concerns and needs that people have for urban wildlife.
1.5 LU SD/HSW
Presented by Anne Lewis, FAIA, Executive Director, City Wildlife, Inc.; John Hadidian, Director, Urban Wildlife Programs; and John Griffin, Director, Humane Wildlife Services; all in partnership with The Humane Society of the United States and City Wildlife, Inc. |
|
4:00 – 5:30pm
"Walk the Talk": Reducing Carbon Footprint in Operations
Calculating and reducing carbon footprint from operating a design firm is an opportunity not only to walk the talk, but also to be a source of inspiration for the staff, consultants, and the client. This presentation will introduce the methods of carbon footprint calculation and explore the reduction strategies. Participants will review the carbon footprint of a design firm with more than 10 offices worldwide, and will learn how to incorporate environmental strategies into day-to-day operations.
1.5 LU SD/HSW
Presented by Jennifer Xu, Ph.D, AIA, LEED AP, Perkins Eastman. |
|
Accessibility and the Fair Housing Act
The Fair Housing Act requires that new multifamily housing with four or more units such as condominiums, student housing, apartments and other building types, include basic accessible features for persons with disabilities. During her presentation, Crandall will discuss the accessibility requirements of the Fair Housing Act, show examples of common design and construction errors, and provide resources to consult for additional information.
1.5 LU HSW
Presented by Marilyn C. Crandall, AIA, USDOJ, Housing and Civil Enforcement Section, and
Kevin Kijewski, USDOJ. |
|
Adolf Cluss: Master of Sustainable Design
For more than a century, Adolf Cluss has held a position of honor among Washington’s architectural pantheon. Admired for their architectural power and historic significance, today Cluss’ buildings are being re-assessed as models of sustainable design, particularly in the context of the regional climate. In this presentation, Elefante explores Cluss’ genius from a new perspective.
1.5 LU SD/HSW
Presented by Carl Elefante, FAIA, QUINN EVANS | ARCHITECTS. |
|
|
Create Excellent Project Managers
How do you identify those who have the potential to be exceptional managers? Are there innate qualities and traits, or can these be taught? How do experienced managers pass on their experience to aspiring managers? This session provides a guide to identifying the qualities that make a great project manager and describes a mentoring approach that leads average talent to exceptional performance.
1.5 LU
Presented by Stephen J. Baker, AIA, LEED AP, Hickok Cole Architects. |
IPD & BIM: A Contractor's Perspective
To make effective use of building information modeling for construction, contractors first need to engage in an intensive dialogue with architects and other design team members about how BIM (Building Information Modeling) affects business and contractual relationships, with a particular focus on the scope of building information contained in a design intent model and mutual agreement on appropriate use of the model for construction purposes. Contractors, like architects, also must carefully align their deployment of BIM technology with their core competencies and seek out every opportunity to streamline workflow and information flow. This session is a case study of how one DC-area construction company—a specialist in large-scale, phased renovation and modernization of occupied buildings—is implementing BIM and related technologies to support enhanced integrated project delivery.
1.5 LU
Presented by Michael Tardif, Assoc. AIA, CSI, Hon. SDA, Director of Integrated Project Delivery Systems, Grunley Construction Company, Inc. |
|
